
Speeduino MLG Binary
v1.0.0Binary log files from Speeduino open-source ECU in MegaLogViewer format. Format characteristics: - Binary format with "MLVLG" magic header - Self-describing: channel definitions embedded in file - Each channel has name, unit, scale, and transform - Values: (raw_value + transform) * scale - Big-endian byte order - Timestamp wraps at 65535ms (~65.5 seconds)
File Format
Channels (22)
correction
ego_correctionEGO CorrectionClosed-loop O2 correction
warmup_enrichmentWarmup EnrichmentCold engine fuel enrichment
accel_enrichmentAcceleration EnrichmentTransient fuel enrichment
gamma_enrichmentGamma EnrichmentTotal fuel correction multiplier
electrical
battery_voltageBattery VoltageSystem voltage
engine
rpmEngine RPMEngine speed
tpsThrottle PositionThrottle position sensor
boost_dutyBoost DutyBoost solenoid duty cycle
idle_loadIdle LoadIdle air control position
fuel
veVEVolumetric Efficiency from VE table
afrAir-Fuel RatioMeasured AFR from O2 sensor
afr_targetAFR TargetTarget AFR from tune
pulse_widthPulse WidthInjector pulse width
duty_cycleInjector DutyInjector duty cycle
ignition
ignition_advanceIgnition AdvanceSpark timing advance
dwellDwellCoil dwell time
pressure
mapManifold PressureManifold absolute pressure
boost_targetBoost TargetTarget boost from boost control
system
loops_per_secondLoops Per SecondECU loop rate
free_ramFree RAMAvailable memory
temperature
coolant_tempCoolant TemperatureEngine coolant temperature
iatIntake Air TemperatureIntake air temperature
Metadata
- Timestamp wraps at ~65.5 seconds
- Channel names/units defined in firmware