
RomRaider CSV Log
v1.0.0CSV log files generated by RomRaider ECU logging software. Commonly used for Subaru ECUs with OpenPort cables. Format characteristics: - Comma (US locale) or semicolon (European locale) delimiter - European locale uses comma as decimal separator (e.g., "14,00") - First column is Time in milliseconds - Channel names include units in parentheses (e.g., "Engine Speed (rpm)") - Subaru-specific parameters like IAM, A/F Learning, etc.
File Format
Channels (27)
correction
afr_correctionA/F CorrectionShort-term fuel trim from A/F sensor
af_learningA/F LearningLong-term fuel trim / A/F Learning value
iamIAMIgnition Advance Multiplier (Subaru learning value)
fine_knock_learningFine Knock LearningFine knock learning value per cylinder
feedback_knockFeedback Knock CorrectionReal-time knock retard
damDAMDynamic Advance Multiplier
drivetrain
gearGear PositionCurrent gear
electrical
maf_voltageMAF VoltageMass airflow sensor voltage
battery_voltageBattery VoltageSystem battery voltage
engine
rpmEngine RPMEngine speed from crankshaft sensor
tpsThrottle PositionThrottle opening angle
loadEngine LoadCalculated engine load
mafMass AirflowMass airflow sensor reading
wastegate_dutyWastegate DutyWastegate solenoid duty cycle
fuel
afrAir-Fuel RatioMeasured air-fuel ratio
injector_dutyInjector Duty CycleFuel injector duty cycle
plx_afrPLX AFRPLX wideband AFR sensor
ignition
ignition_advanceIgnition TimingIgnition timing advance
pressure
mapManifold PressureManifold absolute/relative pressure
boostBoost PressureBoost pressure (gauge)
target_boostTarget BoostTarget boost pressure from ECU
plx_boostPLX BoostPLX boost/vacuum sensor
speed
vehicle_speedVehicle SpeedVehicle ground speed
system
timeTimeLog timestamp in milliseconds
temperature
coolant_tempCoolant TemperatureEngine coolant temperature
iatIntake Air TemperatureIntake air temperature
plx_egtPLX EGTPLX exhaust gas temperature
Metadata
- European locale files use semicolon delimiter and comma decimal separator
- Units in header may vary based on RomRaider settings
- PLX sensor channels require PLX iMFD connected